USED Surplus 4' Ribbed Aluminum Antenna Tower Mast Sections - Lot of 4 - Female end with ring
USED - The mast sections are used surplus. The paint on the mast sections may have some scuff marks and scratches from handling. The mast sections will be dent free and straight. The sections are ribbed wall with ring on the female end of the mast section. Can be used for legs of tripod. Will work for center mast of tripod if the ring is removed from the female end of the mast. This mast section can also be used with the following other items we sell: swivel stake, round base or paddle base. The specifications of the ribbed wall aluminum mast sections is as follows: Length end to end: 48 inches Usable length: roughly 44 1/2 inches Male end length: roughly 3 1/4 inches Wall thickness: 0.09 inch Outside diameter: 1.755 inches Male end outside diameter: 1.56 Female inside diameter: 1.565 The dimensions may vary due to the manufacturing process. These mast section work great with my tripod base which was featured in an article in the june 2011 QST magazine. However, you do have to remove the female end reinforcement ring to allow the mast section to pass all the way thru the center of the tripod. We have the tripod listed also, be sure to check it out!
We Also Recommend
Universal Vehicle Antenna Mast 2" Receiver Hitch Mount Will Work With Antenna Mast O.D. 1" to 1 3/4"